Knowledge | 2022-11-11
The main parameters and correct operation flow of the automatic ultrasonic cleaning machine
The automatic ultrasonic cleaning machine
is a new technical material in the new era. It happened to liberate the hands of many people. In the absence of it, many parts had to be thoroughly cleaned, and this was done by human hands. Not only the actual effect is not very good, but also a long cleaning time. So, there are so many different brands of fully automatic ultrasonic cleaning machines on the market, what is the difference between them? Automatic ultrasonic cleaning machines do have many well-known brands, however, different brands of goods are the same function. The difference is their specifications, actual function, output power, and application industry, which is also the standard to distinguish between cleaning machines.
For different automatic ultrasonic cleaning machines, applicable to different industries. Only with this difference can the companies in need know what products they should choose. There is not much difference between different brands of fully automatic ultrasonic cleaning machines from the mechanical equipment itself. Therefore, if we want to buy in the future, we must ask clearly, and according to their own company needs to buy.
The key to the automatic ultrasonic cleaning machine is to clean according to the ultrasonic method. It can cause air bubbles depending on the width, thereby affecting the external stain and promoting the gap between the stain layer and the surface. What are the basic parameters of an ultrasonic cleaning machine to remove dirt?
1. Cleaning materials the key cleaning method of an ultrasonic cleaning machine is to select the ultrasonic cleaning technology. When cleaning can add organic chemical organic solvent or an oil-based cleaning machine.
2. For ultrasonic, the higher the power density, the stronger the actual effect of cavitation, the faster the cleaning speed, and the stronger the actual cleaning effect. As there are a lot of automatic ultrasonic cleaning machines on the market, there are different categories and main parameters, the company must be based on their actual situation to choose.
The correct operation procedure of an automatic ultrasonic cleaning machine
The use of an automatic ultrasonic cleaning machine needs to follow a certain operating process, the correct use can not only play an extremely protective role, and even extend the service life of the machine. The following small series is for you to introduce the use of automatic ultrasonic cleaning machine features.
Open the wooden box, check the appearance of the equipment that is damaged, and control the electrical components in the box that are loose. If the appearance is damaged, please contact us immediately, do not unauthorized install and use.
Connect the power cord, slot-type aviation plug, and heater power supply according to the wiring diagram, and grounding, if you do not understand any questions, please feel free to contact Buck after-sales Service Department, and my company will be the whole phone guidance; If there are special needs, will be rushed to the site for installation and commissioning training.
3. Warm Up
Close and open, set the temperature control instrument temperature to 70 ° C (the temperature can also be set according to the actual situation), start the main power and heating switch, and start heating.
4. Put in the detergent
When the temperature is heated to the set temperature, the detergent is melted evenly, put into the sink, turn on the ultrasonic power supply, so that it works.
Pretreatment of the surface of the workpiece, such as heavy oil, coke, and other adhesion, for the preparation of the back cleaning.
6. Ultrasonic cleaning
Put the workpiece into the cleaning tank, set the cleaning time according to different cleaning parts, and start cleaning.