Knowledge | 2022-04-08
Ultrasonic cleaning machine for parts
Part ultrasonic cleaning machine is an ultrasonic cleaning device designed for mechanical parts, hardware, or the like. Traditional cleaning parts generally adopted a method of using metal brushes, scrapers, and other tools to remove dirt on the surface of the part. There are also mechanical tools to remove oil, embroidery, old coating, carbon, etc. from the surface of the part, such as an electric metal brush, electric grinding wheel, etc. There are a lot of shortcomings in these ways. For parts, complicated parts, deep holes, but the dirt at the corner is difficult to clean. Artificial cleaning time is relatively long. The cleaning efficiency is also relatively low. Part ultrasonic cleaning machine can quickly clean the surface, gap, and blind, clean any angles.
Parts ultrasonic cleaning machines have been widely used in industries. It is mainly where the part cleaning is relatively clean, such as the cleaning of the parts during the finishing process, and the cleaning before assembly. Part ultrasonic cleaning machine not only cleans the surface of oil but also has a good cleaning effect on the cream. It can also be used to clean the embroidery and oxide layers of the surface of the part. Use a part ultrasonic cleaning machine to clean the workpiece, and the process is simple. The employee labor intensity can be reduced. The most important thing is that the cleaning efficiency is high, and the effect is good. It is a cleaning device that is favored by customers.