Knowledge | 2022-08-12
The industrial ultrasonic cleaning machine can quickly remove oil and rust from mechanical parts
Of course, industrial machinery parts are cleaned with an ultrasonic cleaning machine
, general mechanical parts in the Assembly, assembly, assembly are required to clean, and some parts in the trial operation according to the needs of cleaning. And the goal of cleaning parts is to remove residual on the surface of the various dirt, such as cast sand, iron filings, rust, abrasive, oil stains, dust, and so on.
The cleanliness of parts after cleaning will directly affect the assembly quality and service life of construction machinery. Therefore, parts cleaning is a very important part of construction machinery assembly. The industrial ultrasonic cleaning machine is very good at cleaning the slit, groove, deep hole, and blind hole surface and inside small parts. At the same time, in the oil, rust, and oxide removal also has a very good effect. The main application of industrial ultrasonic cleaning machines is cleaning hardware parts of the oil, wax, carbon, and dirt. Ultrasonic cleaning of oil stains has a natural advantage. The principle of the ultrasonic cleaning machine is that the high-frequency oscillation signal from the ultrasonic generator is converted into high-frequency mechanical oscillation by the transducer and propagated to the cleaning solvent. The ultrasonic wave in the cleaning solution, which radiates forward, causes the liquid to produce tens of thousands of tiny bubbles, and the tiny bubbles in the liquid vibrate and break under the action of the sound field, contaminants can be completely removed from the surface of the product.