Knowledge | 2022-10-20
What method can be used to quickly and thoroughly clean industrial production of a variety of oil dirt?
There are many kinds of oil fouling in industrial production. Because the working environment is different, the oil fouling is also very different. Different types of oil stains need to be cleaned with different industrial cleaning agents to achieve the goal of removing oil stains. According to the different cleaning principles, we can divide the cleaning methods of industrial oil stains into physical cleaning, chemical cleaning, and physical plus chemical cleaning, there are three ways to remove oil from workpieces: ultrasonic cleaning, organic solvent cleaning, and scrubbing.
First, ultrasonic cleaning uses water-based cleaning agent cleaning, with the ultrasonic cleaning machine vibration makes the solvent produce a large number of small bubbles, these small bubbles in the formation, growth, and precipitation of a strong mechanical force, promote the surface of the workpiece adhesion of grease, dirt quickly from, thus accelerating the cleaning process, shorten the cleaning time so that the oil more quickly and thoroughly. PS: the use of an ultrasonic cleaning machine must be accompanied by industrial oil remover to achieve the effect of oil, oil remover is a complex mixture of water-based organic and inorganic chemicals. Metal processing, food, textiles, transportation, shipping, construction, electrical appliances, medicine, chemical, and other industrial fields have a wide range of applications.
Second, organic solvent oil removal is the use of“The same kind of miscible” principle to remove oil on the surface of parts. However, some low-cost enterprises use kerosene, trichloroethene oil, white electric oil, and Trichloroethane oil to clean the oil on the surface of their workpieces. However, these detergents not only cause serious environmental pollution but also affect the health of the workers.
Third, scrub the use of dishcloth scrub oil, a clean cloth soaked in cleaning solvent, and then scrub the surface of the workpiece to remove the dirt, and grease, this method requires manpower, is more time-consuming, and is generally not recommended.