Knowledge | whale cleen

The principle of the single-groove industrial ultrasonic cleaning machine is to use the high frequency of the ultrasonic wave. It can transform into high-frequency kinetic energy through the transducer. And then act on the liquid medium in the cleaning ta

According to the single-slot ultrasonic cleaning machine instructions, the use of the steps is as follows. First, the first configuration of cleaning fluid, in the tank to join the right amount of water and detergent, to ensure that the cleaning fluid can

There are a variety of ultrasonic cleaning machines, such as single-or multi-slot, and connected and separated cleaners. Although the various specifications can make the ultrasonic cleaner better suited to the work environment, sometimes it is difficult f

The principle of the ultrasonic cleaning equipment is the recovery of some precious metal ions, such as silver ions, and other heavy metal ions, especially those that simply form environmental pollution of heavy metal ions such as chromium, copper, and ot

Ultrasonic cleaning equipment not only cleaning effect is very good, and low-cost, which promotes the universal use of this commodity. To make the cleanup even more effective in practice, here's what to look out for when you clean up.        First, pa

Ultrasonic cleaning equipment for a long period in the use of the process, it will cause some parts of damage, we need to ultrasonic cleaning machine for maintenance and maintenance, ultrasonic cleaning machine maintenance needs to be done in place, only 

The cleaning effect is far beyond the ordinary cleaning method        The application of an industrial ultrasonic cleaning machine to stop the cleaning is now known as a highly efficient and effective cleaning method, its cleaning efficiency and cleaning 

Ultrasonic cleaning machine drying can seriously damage the ultrasonic cleaning! Please fill at least half the height of the cleaning solution, not exceeding the maximum number of cavities on the surface of the liquid level. Solvent-based ultrasonic clean

The ultrasonic cleaning machine is a kind of machine equipment for high-tech enterprises to clean air pollution. The ultrasonic cleaning machine sends out a high-frequency oscillating signal according to the ultrasonic sensor, and the sound from the ultra

Ultrasonic equipment is widely used at present, there are many types of ultrasonic cleaning machines, in the process of use, can be based on the actual situation, use will produce a lot of atmospheric pressure and micro-foam blowing cleaning objects, surf

The ultrasonic cleaning machine before the painting treatment process is very important, general conservative process is degreasing, washing, hydrochloric acid rust, washing, neutralization, washing, surface conditioning, washing, phosphating, washing, an

The application of ultrasonic cleaning equipment is very extensive, in the use of the process, sometimes equipment failure. So, in the end how to detect the failure of the ultrasonic cleaning machine? The following points can be referred to.        1. If