Knowledge | whale cleen

Hardware is usually heavy and very complex in construction. Therefore, it is not suitable for manual cleaning. Manual cleaning is not only troublesome and time-consuming but also unable to remove the dirt in the crevices. Moreover, the types of dirt on th

Steel wires, cables, fine rods, steel bands, pipelines, and fasteners need to be lubricated during the processing process of continuous industrial products. Before entering the lane process (such as electroplating, squeezing, and welding), the surface lub

The cleaning of the cylinder block, cylinder head, and other parts of the engine has been a headache, because the internal parts of this kind of complex, attached to the internal iron chips, dust, sticky sand, and other stains are difficult to clean. Alth

With the continuous development of the ultrasonic cleaning industry, more and more industries have used single-slot ultrasonic cleaning machines, such as clocks, jewelry, semiconductor, scientific research laboratories, hardware parts, etc. Many people wi

The ultrasonic washing machine is one of the advanced methods for removing rust in modern industry. Steel surface treatment engineering has developed rapidly in the last century, large ultrasonic washing machine manufacturers r & D and production of r

Metal parts need surface treatment before assembly because some machine tool equipment aging causes the metal parts surface to produce oil stain and leave oil film, it affects the bonding force between the surface coating and the base metal, and has a gre

How does the ultrasonic washer machine work? Ultrasonic washer machine is the most scientific and technological environmental protection physics cleaning equipment in the industry, by the public pursuit. The cleaning effect is as follows: high speed, high

Green manufacturing is a modern manufacturing model that comprehensively considers the environmental impact and resource efficiency. Its goal is to make the product from designing, manufacturing, packaging, transportation, and use into the entire product 

The basic structure of the ultrasonic washer machine for substrate glass        Substrate glass ultrasonic washer machine mainly consists of two parts: ultrasonic cleaning tank and ultrasonic generator. The ultrasonic cleaning tank is made of an ultrasoni

1. The use of the piston rod:        The piston rod is a connection part that supports the Pistons. Most of them are applied to the performing components of oil cylinders and cylinder movement. They are motion components with frequent movements and high t

Ultrasonic cleaning technology in foreign countries is a very mature cleaning technology, widely used in machinery, electronics, and other fields. The cleaning of the circuit board after welding is one of the most important applications. Domestic applicat

The sonic cleaning machine heats the solution for two reasons:        1. Ultrasonic transducer produces heat        When the sonic cleaning machine is in operation, the Ultrasonic transducer installed at the bottom of the cleaning tank body will generate